AWK-5232-RCC Series

Industrial IEEE 802.11a/b/g/n dual-radio wireless AP/bridge/client
Interested in bulk pricing for this item? Does your project have special requirements? Contact a Moxa rep.
Features and Benefits
- Designed specifically for rail carriage-to-carriage communication
- IEEE 802.11a/b/g/n compliant
- Dual-radio design: 2.4 GHz and/or 5 GHz RF bands
- Redundant power inputs and PoE+
- Up to 300 Mbps data rate
- M12 anti-vibration connectors
- MIMO technology increases data throughput and range
- Complies with a portion of EN 50155 specifications
- -40 to 75°C operating temperature range
Introduction
The AWK-5232-RCC series industrial 802.11n wireless AP/bridge/client is an ideal wireless solution for applications such as onboard passenger infotainment systems and inter-carriage wireless backbone
networks. It provides a faster data rate, wider range, and a noticeably stronger signal at a distance than the 802.11g model. With two independent RF modules, the AWK-5232-RCC series supports a great
variety of wireless configurations and applications. The auto carriage connection (ACC) feature provides simple deployment and increases the reliability of wireless carriage backbone networks. The AWK-
5232-RCC series is also optimized for passenger Wi-Fi services and complies with a portion of EN 50155 specifications, covering operating temperature, power input voltage, surge, ESD, and vibration, making
the switches suitable for a variety of industrial applications. The AWK-5232-RCC’s two DC power inputs increases the power supply reliability, and it can also be powered via PoE+ for easier deployment.
Higher Data Rate and Greater Bandwidth
• High-speed wireless connectivity with up to 300 Mbps data rate
• MIMO technology improves data throughput via mulitplexed, smart antenna transmissions and receptions
• Channel bonding technology for increased throughput or channel redundancy
Redundancy to Increase System Reliability
• Dual DC power inputs and PoE+
• Immunity against disconnection caused by radio interference
Specifications for Rail Onboard Applications
• Auto Carriage Connection (ACC)
• Maximum WPA2/802.11i security
• Client isolation
• Multicast traffic rate control
Datasheet
• WLAN Interface | |
Standards | IEEE 802.11a/b/g/n for Wireless LAN IEEE 802.11i for Wireless Security IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseTX IEEE 802.3ab for 1000BaseT IEEE 802.3at for Power-over-Ethernet Plus IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1Q for VLAN |
Spread Spectrum and Modulation (typical) | • DSSS with DBPSK, DQPSK, CCK • OFDM with BPSK, QPSK, 16QAM, 64QAM • 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 11 Mbps • 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps • 802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps (multiple rates supported) |
Operating Channels (central frequency) | US: 2.412 to 2.462 GHz (11 channels) 5.18 to 5.24 GHz (4 channels) EU: 2.412 to 2.472 GHz (13 channels) 5.18 to 5.24 GHz (4 channels) |
Security | • SSID broadcast enable/disable • Firewall for MAC/IP/Protocol/Port-based filtering • 64-bit and 128-bit WEP encryption, WPA /WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and AES) |
Transmission Rates | 802.11b: 1, 2, 5.5, 11 Mbps 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11n: 6.5 to 300 Mbps (multiple rates supported) |
TX Transmit Power | 802.11b: 1 to 11 Mbps: Typ. 18 dBm (± 1.5 dBm) 802.11g: 6 to 24 Mbps: Typ. 18 dBm (± 1.5 dBm) 36 to 48 Mbps: Typ. 17 dBm (± 1.5 dBm) 54 Mbps: Typ. 15 dBm (± 1.5 dBm) 802.11a: 6 to 24 Mbps: Typ. 17 dBm (± 1.5 dBm) 36 to 48 Mbps: Typ. 16 dBm (± 1.5 dBm) 54 Mbps: Typ. 14 dBm (± 1.5 dBm) |
TX Transmit Power MIMO | 802.11a/n (20/40 MHz): MCS15 20 MHz: Typ. 13 dBm (± 1.5 dBm) MCS15 40 MHz: Typ. 12 dBm (± 1.5 dBm) 802.11g/n (20 MHz): MCS15 20 MHz: Typ. 14 dBm (± 1.5 dBm) |
RX Sensitivity | 802.11b: -92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps, -88 dBm @ 5.5 Mbps, -84 dBm @ 11 Mbps 802.11g: -87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps 802.11a: -87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps |
RX Sensitivity MIMO | 802.11a/n: -68 dBm @ MCS15 40 MHz, -69 dBm @ MCS15 20 MHz, -70 dBm @ MCS7 40 MHz, -71 dBm @ MCS7 20 MHz 802.11g/n: -69 dBm @ MCS15 20 MHz, -71 dBm @ MCS7 20 MHz |
• Protocol Support | |
General Protocols | Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, DHCP |
AP-only Protocols | ARP, BOOTP, DHCP, STP/RSTP (IEEE 802.1D/w) |
• Interface | |
Connector for External Antennas | AWK-5232-M12-RCC: QMA (female) |
M12 Ports | 2, 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
Console Port | RS-232 (RJ45-type) |
LED Indicators | PWR1, PWR2, PoE+, FAULT, STATE, WLAN1, WLAN2, LAN1, LAN2 |
Alarm Contact (Digital Output) | 1 relay output with current carrying capacity of 1 A @ 24 VDC |
Digital Inputs | 2 electrically isolated inputs • +13 to +30 V for state “1” • +3 to -30 V for state “0” • Max. input current: 8 mA |
• Physical Characteristics | |
Housing | Metal, IP30 protection |
Weight | 1.2 Kg |
Dimensions | 74.55 x 135 x 105 mm (2.94 x 5.31 x 4.13 in) |
Installation | DIN-Rail mounting (standard), wall mounting (optional) |
• Environmental Limits | |
Operating Temperature | Standard Models: -25 to 60°C (-13 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5% to 95% (non-condensing) |
• Power Requirements | |
Input Voltage | 12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet Plus (IEEE 802.3at compliant) *Compliant with EN 50155 on 24 VDC |
Connector | 10-pin removable terminal block |
Power Consumption | Maximum 24.5 watts 12 to 48 VDC, 1.5 A (max.) |
Reverse Polarity Protection | Present |
• Standards and Certifications | |
Safety | UL 60950-1, EN 60950-1 |
EMC | EN 301 489-1/17, FCC Part 15 Subpart B, EN 55022/55024, IEC 61000-6-2/4 |
Radio | EN 300 328, EN 301 893 |
Rail Traffic | EN 50155*, EN 50121-1/4 *Complies with a portion of EN 50155 specifications. Please contact Moxa or a Moxa distributor for details. |
• Reliability | |
MTBF (mean time between failures) | 350,643 hrs |
• Warranty | |
Warranty Period | 5 years |
Details | See www.moxa.com/warranty |
Item | Description | Buy Now |
---|---|---|
AWK-5232-M12-RCC-US-CT | Contact Us | |
AWK-5232-M12-RCC-EU-CT | Contact Us | |
AWK-5232-M12-RCC-US-CT-T | Contact Us | |
AWK-5232-M12-RCC-EU-CT-T | Contact Us | |
AWK-5232-M12-RCC-US | Contact Us | |
AWK-5232-M12-RCC-EU | Contact Us | |
AWK-5232-M12-RCC-US-T | Contact Us | |
AWK-5222-M12-RCC-EU-T | Contact Us |
Item | Description | Buy Now |
---|---|---|
No product found |